Re: How to snyc one 7 Series Transceiver to anothe
I have not worked with such video streams, but in general a receiving transceiver locks to the incoming data.
If you want the same data to be "forwarded" out an another transceiver, the data will be clocked out locked to a local oscillator.
If the units are not locked to each other, there will always be a small difference in clock frequencies.
To handle this, the transport protocol must have some slack. This is normally done by inserting some redundant K symbols in the lowest layer.
If the incoming data has no slack, you must make sure that your transmit data rate is slightly higher than the incoming data rate.