Re: HOw to split bus in FPGA Adv using "Block Diagram'
Hi dll_embed,
THank you for your help, now I manage to chage the bus with the method you have suggested, it is so simple.
1. click the "Adds a Bus with a Ripper" and route the top-level bus, then double click the bus and change the properties accordingly to the top-level bus width, example : A[15:0].
2. secondly, click "Adds a Bus with a Ripper" again, route it then change the bottom-level bus width, example : a[7:0]
Regards,
Always smart