How to snap compoents to grid in altium desiner????

Status
Not open for further replies.
S

s3034585

Full Member level 4
Joined
May 24, 2004
Messages
226
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,087
Hi Guys
Can any one pls tell me how to snap already placed components to grid.
i have already set the compoent grid to 0.1mm but when i do snap component to grid it dosnt shift the compoenent....

i already layed out the entire board and due to some reason the compoenets r not on grid....

thanks in advance
tama
 

Once you have turned on the snap to grid and set the appropriate component grid you place the cursor on the part and press and hold the left mouse button (drag) while moving the mouse the component will follow. If you have the electrical snap on <shift-e> then the part may pull to an adjacent component. Just turning on the snap grid will not move any of the currently placed parts. You can set the origin to a different point (edit->origin->set) if you want to move the entire grid. Does this help?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…