How to set in HFSS to get the normalized radiation pattern?

Status
Not open for further replies.
L

luobowr

Newbie level 3
Joined
Apr 26, 2007
Messages
4
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,310
hfss radiation pattern

How to set in HFSS to get normalized radiation pattern? Thank you very much!
 

radiation pattern hfss

i also need the answer
 

normalized radiation pattern

lets think you are looking for normalized dB. Gain
what should you do?
here's the answer:

in the trace section write:

dB(GainTotal)-max(dB(GainTotal))

this will give you normalized rad. pat. for gain total.
for other stuff you can do the same thing.
 

Re: How to set in HFSS to get the normalized radiation patte

Hello everyone,

I just stumbled upon this thread and was wondering if the gain conversion to decibels using GainTotal and the function dB is actually correct.

The function dB calculates 20*log10(QUANTITY). However, since GainTotal is 4*PI*RADIATION_INTENSIY/P_ACCEPTED, GainTotal should be converted to decibels using 10*log10(GainTotal). Consequently, the correct conversion should be (dB(GainTotal)-max(dB(GainTotal)))/2, right?

Best regards
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…