Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to separate signals from a measured spectrum ?

Status
Not open for further replies.

manasiri

Member level 5
Joined
Mar 1, 2006
Messages
92
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,286
Activity points
2,304
signal extraction

Dear explorers,

How I can separate two signal spectrum from a measured spectrum in spectrum analyzer?
the data of measuered spectrum are available. one signal is a square wave and another is an image signal that added to the square wave (in time domaine).
 

vadkudr

Advanced Member level 4
Joined
Jul 12, 2005
Messages
109
Helped
15
Reputation
30
Reaction score
4
Trophy points
1,298
Activity points
2,236
signal extraction

I think that for this separation task Kalman filter can be applied (in time domain).

Added after 23 minutes:

The most suited is Switching Kalman Filter

see
Murphy, KP (1998). Switching Kalman Filter. Technical Report 98-10,. Compaq Cambridge Research Laboratory
(find link in internet by yourself)

https://donoghue.neuro.brown.edu/pubs/wuEMBS03.pdf
Here is basic algorithm without theory.
 

    manasiri

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top