Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to read information on TCP IP

Status
Not open for further replies.
A

aju

Newbie level 2
Joined
Dec 11, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,297
I have a Keithley 3706 - S switcher, which is supplied with its own software. This software communicates with the device via TCP IP. I know that I could send packets using Matlab. I am trying to interact with a Keithley 3706 - S switcher via Matlab(R2007a) using the ethernet.

I need to know the structure of the commands being sent from the software to the device so that I can send the same structure using Matlab.
This is the product I am working with:
**broken link removed**
 

Hi Aju,

I would suggest that you install a packet sniffer like wireshark onto your PC and try and capture the packets that are being sent from the software to the unit.

Cheers

Stolzie
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top