Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to read data from the PIC using MPLAB C18.. pls help...

Status
Not open for further replies.
K

keolim85

Newbie level 5
Joined
Feb 14, 2008
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,330
mplab c18 read port

Currently im working on a project using MPLAB C18, im using PIC18F67J50.
How am i going to read the data from the PIC18F67J50 after the scanner had scan the card? My project is configuring the card scanner machine using serial port. The card scanner machine is attached to RS232 port. Can anyone give any advice or any code to show how to read data frm the PIC? Thanks a lot.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top