Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to program microcontroller in C?

Status
Not open for further replies.
Microcontroller in C

My final year project is Intelligent Antilock Braking System.My partner and I decided to use an RC car for the prototype.In order to make the system intelligent, a controller (Fuzzy Logic or Neural Network based) will take inputs of steering angle and slip value (calculated from the measured speeds of the body and wheel) to modulate the applied brake so that the slip value is maintained around 0.2 (calculated in programming)
1)any suggestions for the controller?is one of your PIC products feasible?
2)what is the sensor you suggest for the speed of the RC car?
3)what is the sensor you suggest for the steering angle?
FYI, the wheel speed is measured using a Hall effect sensor,and will be fed into a controller with PWM.
hope to hear from you..thanks
 

Re: Microcontroller in C

hi

actually i have not studied fuzzy logic yet

can anybody send me a small note on fuzzy logic...or defination type reply for what is fuzzy logic and why it is used?..

also in which kind of application we can use this fuzzy logic?..

Popatlal
 

Microcontroller in C

Can anyone post any book on Intelligent Sensor Design Using the Microchip dsPIC. Thanks
 

Microcontroller in C

Hi every one
Hw one can make Hex file in keil

Added after 1 seconds:

Hi every one
Hw one can make Hex file in keil
 

Microcontroller in C

pic basic doesnot need knowledge on c... : )
but c is well structured..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top