How to Program an EEPROM?

[IndiJones]

how toprogram eeprom ic

I have a multiplexer circuit that I built to control the main circuit but it makes the circuit very large because of large numbers of dicreet ICs. I want to do the timing by EEPROM but I don't know how to program one and what do I need other than the EEPROM IC. Please advise!

 

[ramesh]

Free PonyProg software and programming ciruits are available at

Have a look. May be of use to you.

 

[cb30]

what Type of eeprom want yuo programm. i2c or 27xxx ?

 

[IndiJones]

I2C type.

 

[winworm]

You can use I/O port of muc to simulate IIC protocol or make a IIC core by using FPGA. You can get IIC spec at **broken link removed**.

 

[Nick C.]

I believe the JDM will program 24Cxx type
EEPROMs.

Nick C.

 

[cb30]

Yes, JDM programmer is a good choice. It program quasi all i2c IC. You can use ICPROG free software.

 

[stroma]

IndiJones, I believe that jdm Is the best for you. Here you are some direct links:
http://www.ic-prog.com
**broken link removed**

 

[IndiJones]

Thanks a LOT! I've downloaded IC-Prog and am trying to learn how to use it.

 

[yangxh]

Ues the soft M Porg,It' free and can program many chips ,such as 24Cxx,93CXX and so on.