How to program a micro-processor to execute applications

Status
Not open for further replies.
S

Sibtain

Member level 3
Joined
Feb 27, 2005
Messages
63
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Activity points
1,714
hey i have done enough 8051 isnt there any material on the net which shows how to program a micro-processor to execute applications for instance motor control or something like that plz send me links if you have any on the use of micro processor
 

Re: micro processor?

Here you will find 8051-family prorammer's guide:
**broken link removed**
And here, an example of a code, which can be used to control brightness of LEDs or control speed of motors (PWM):
http://www.iguanalabs.com/pwm.htm
Some more examples:
http://electroguys.com/8051/interfacing.html

There are millions of them on the WEB .. GOOGLE, mate, GOOGLE ..

Regards,
IanP
 

Re: micro processor?

Generally Micro processor IC aren't come with internal memory also thier data bus are multiplexed so for small controlling of motor u need huge hardware so it is generally not available on net.

But if u want to controlling of motor then u can only change ur program compatible to micro processor u use , also u have to manage external code & data memory with delay of memory module
 

Re: micro processor?

On the german site of www.keil.com (keil.de ???) are good links too. I use for motor control DS89c420 - a Dallas highspeed 8051 compatible controller. Very fast and reprogramable through RS232 interface from computer. The soft for this you may find on Dallas ftp site too.
I drive huge DC motors, for this i use analog steering through APEX full h-bridge module. (400V max, 20A max.)
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…