fastpcb021
Newbie level 1
- Joined
- Aug 11, 2016
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Location
- ShenZhen City
- Activity points
- 8
Here have some measures, please check whether are right? If have better measures, please advise.
1. Exposed copper: There is no timely processing out of oil area;
2. Not balanced IC Sn surface: Don’t carefully checked IC area after Hot Air Leveling;
3. Repair: Worker single-handedly take-off and release board to make boards overlap each other in repair, or off oil; or don’t timely separate the boards after re-print oil;
4. Scratching: Worker single-handedly take-off and release board to make boards overlap each other in transport products to cause scratching.
1. Exposed copper: There is no timely processing out of oil area;
2. Not balanced IC Sn surface: Don’t carefully checked IC area after Hot Air Leveling;
3. Repair: Worker single-handedly take-off and release board to make boards overlap each other in repair, or off oil; or don’t timely separate the boards after re-print oil;
4. Scratching: Worker single-handedly take-off and release board to make boards overlap each other in transport products to cause scratching.
Last edited by a moderator: