Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to plot operating points using Hspice

Status
Not open for further replies.

A_Graham

Newbie level 3
Joined
Sep 8, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Ireland
Activity points
1,304
hspice waveview processing command

I'm using Hspice and to plot the operating points using WaveView of a mos, having done a DC sweep of the Vgs. I know that if I use

.option post

then the command

plot dc lx7(xmnt2.xmn)

should work to plot the gm. So in the output.lis file, I see something that looks like an ASCII plot, but I need to plot it in WaveView, and its not available there in any of the files, even though I used .option post.

Added after 14 minutes:

Sorry, just copped it!

I needed to put gm= in front of the lx7 statement like this:

.plot dc gm=lx7(xmnt2.xmn)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top