Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Do you mean how to increase transmitter strength? Doing so may exceed the specs/regulations which apply to the device.
It will help if you are at a high altitude when broadcasting. Also if you are outdoors, away from structures, trees, metal walls, etc.
It may be possible to figure out how to make a better antenna than the walkie-talkie already has.
You can try increasing supply voltage (within limits). However this won't help if there is voltage/current limiting in the output circuitry.
Any other method will involve altering the output circuitry which powers the antenna. Reduce resistances, etc. Of course it is at risk of ruining the unit.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.