Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
How to make programming tester cable utp?
- Thread starter andrik
- Start date
- Status
IanP
Advanced Member level 5
- Joined
- Oct 5, 2004
- Messages
- 7,942
- Helped
- 2,311
- Reputation
- 4,624
- Reaction score
- 531
- Trophy points
- 1,393
- Location
- West Coast
- Activity points
- 66,416
Re: tester cable UTP
Passive tester:
https://www.southwest.com.au/~jfuller/rj45/rj45.htm
Active tester:
https://www.hw-server.com/constrc/tpct.html
Regards,
IanP
Passive tester:
https://www.southwest.com.au/~jfuller/rj45/rj45.htm
Active tester:
https://www.hw-server.com/constrc/tpct.html
Regards,
IanP
- Status
Similar threads
-
-
How to make PIC16f877 programming with bluetooth...
- Started by abusabbath
- Replies: 4
-
How to make a programmer for atmega8/89cxx programming?
- Started by halee awan
- Replies: 4
-
-
Programming PIC using Low Voltage Programming Cable LVP ICSP
- Started by apgphp2005
- Replies: 5