Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to make analogous antenna in 2.5D simulator?

Status
Not open for further replies.

pir0texnik

Member level 3
Joined
Aug 7, 2005
Messages
64
Helped
15
Reputation
30
Reaction score
11
Trophy points
1,288
Activity points
1,735
3D model to 2.5D

Hello All!

How make analogous antenna in 2.5D simulator (Ans Designerd, Sonnet, AWR, Zeland etc)? I can not understand how to simulate a lumped element connected between port and strip.
Help please!.. I'll appreciate for any example file. Thank you!
 

jian

Advanced Member level 3
Joined
Sep 8, 2003
Messages
868
Helped
176
Reputation
352
Reaction score
22
Trophy points
1,298
Activity points
9,433
Re: 3D model to 2.5D

Hi, pir0texnik:

On IE3D, you can define ports on the structures to replace lumped elements there. Then, you can add one or multiple black boxes representing structures (FILE->ADD GEOMETRY MODULES) into MODUA (bundled circuit simulator for IE3D). You can add one or multiple s-parameter files (FILE->ADD PARAMETER MODULES) into the schematic. You can also connect lunmped elements such as R, L and C to the geometry and parameter modules together and do a mixed EM and circuit simulation on your design consisting structures and lumped elements. You are able to find the radiation patterns of the complete design. Regards.
 

pir0texnik

Member level 3
Joined
Aug 7, 2005
Messages
64
Helped
15
Reputation
30
Reaction score
11
Trophy points
1,288
Activity points
1,735
Re: 3D model to 2.5D

Thank you!! I'll try what you said.
How much it will correspond with this 3D model ?..
 

jian

Advanced Member level 3
Joined
Sep 8, 2003
Messages
868
Helped
176
Reputation
352
Reaction score
22
Trophy points
1,298
Activity points
9,433
Re: 3D model to 2.5D

Hi, pirOtexnik:

Please send me the illustration of your structure. I could not open your file and see what your structure looks like. Regards.
 

pir0texnik

Member level 3
Joined
Aug 7, 2005
Messages
64
Helped
15
Reputation
30
Reaction score
11
Trophy points
1,288
Activity points
1,735
Re: 3D model to 2.5D

jian said:
Hi, pirOtexnik:
Please send me the illustration of your structure. I could not open your file and see what your structure looks like. Regards.
Ок, here is the image.
Blue is metal, yellow rectangle is lumped element, red is lumped port.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top