Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to make a clock from a NOT gate?

Status
Not open for further replies.

bizoo

Member level 5
Joined
Jun 22, 2005
Messages
90
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
2,057
have any one made a clock out of a not gate, by simply connecting input to output
 

Re: clock from NOT gate

this is a hot topic for reserach these days, search google, i dont think ne one here have much clue abt it
 

    bizoo

    Points: 2
    Helpful Answer Positive Rating
Re: clock from NOT gate

ne links will be welcomed
 

Re: clock from NOT gate

yes of course a NOT can work as a clock generator. what is your doubt bizoo
 

Re: clock from NOT gate

thanks but can u tell me , wat will be the frequency of this clock which u have uploaded in this thread
 

Re: clock from NOT gate

Hi ,
the frequency of oscillation depends on the Threshold voltage of the NOT gates,
for high frequency you must use 'HCT' and 'F' gates ( 74f04)

the circuit works so easily :
1- assume that Vx=1 therefore Vz=Vy=0
because Vz < Vth => C capacitor charging until the Vz voltage reaches Vth of NOT gate,
( Vth = Vz )
2- when Vz= Vth => It changes the state and Vx = 0 , Vy=Vz =1
therefore c is decharging until Vz <Vth_low => Vx=1

and ......
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top