wp100 said:Hi Ahmad,
Project notes almost done, have sent you a PM
ZynT said:Hi everybody;
I've dealt with pcb making at home. Sometimes, I achieved good job, but some I've failed. I tried many times toner transfer method. Actually, I can said that, the most important two things are toner and paper.
I print my circuits from different copy center. Their toners are various. Toners of some give good result, but some does not. I've researched many times this point on the internet to get approprite toner and paper, but I have not yet.
I hope this discussion gives us useful information.
i'm simply asking what is the difference in the name, appearance, cost, etc between the copper board for uv method and that for the toner transfer method. my supplier doesn't know the differenc
however, if u want to use toner transfer method, it doesnt matter if the board is photo resist or not.
I have the info that we need 1.5 M concentration of FeCl and 70°C
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?