How to integrate IP core in a design in Altera FPGA kit using Quartus II?

vsrpkumar · Sep 14, 2006

Hi
I have one doubt.we are developing a big core in our company.A small IP core is brought from other company.I have to test the dsign in FPGA.how to integrate that ipcore in ours design in altera FPGA kit using quartus-II software.
Thanking you

bansalr · Sep 14, 2006

Re: Hi

First try out simulating the design. if u get test bench.
After that u connect the IP core to ur processor design and port into fpga.

Is the board available for the IP. the inputs and outputs.
then u connect it to some logic and see how u can drive inputs from external world and check the output.

How to integrate IP core in a design in Altera FPGA kit using Quartus II?

vsrpkumar

Member level 4

bansalr

Full Member level 3

Similar threads

How to integrate IP core in a design in Altera FPGA kit using Quartus II?

vsrpkumar

Member level 4

bansalr

Full Member level 3

Similar threads

Privacy & Transparency

Privacy & Transparency