Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to inspect and diagnose a bad steering box (esp. rick end pinion type) that shoul

Status
Not open for further replies.

dineshdeshmuk

Full Member level 5
Full Member level 5
Joined
Sep 12, 2011
Messages
285
Helped
18
Reputation
36
Reaction score
18
Trophy points
1,298
Visit site
Activity points
3,131
How to inspect and diagnose a bad steering box (esp. rick end pinion type) that should be replaced with a new one ?

How to figure out that a particular steering box of a car needs to be replaced ?

thanks
 

We had a car that developed a 'catch' in the steering when driving. It was as though the steering wheel was stuck in a momentary detent. It did not interfere with safe driving.

I examined the power steering fluid. It had tiny metal particles in it. I suspected there was grinding occurring somewhere in the steering mechanism.

We had the car inspected. I forget if I mentioned the sticky steering. Anyway the mechanic said it needed a new rack-and-pinion.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top