Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to get the bill of materials from a ODB++file?

Status
Not open for further replies.
D

DR350SE

Junior Member level 2
Joined
Dec 16, 2002
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
74
Hello ,
is there someone who knows how to get bill of materials from a ODB++file ?
 

extract bom from odb++

Most CAM editors these days can import an ODB++ file. What CAM editor do you have avaiable? Some of them can spit out a BOM from an imported ODB++ file.
 

Re: Bom from ODB++

A couple of weeks ago I started smt preparation .
In the past they did all the preparation from bom & pick-place with Excel and verified with drawings from client .
It's not easy and always error's .
So I'm looking for a better way and think at somekind of software .
(I found that with notepad you can see pick&place from ODB++)

Witch software is good and easy .
 

Re: Bom from ODB++

CAM350 is a very versitile CAM editor, and it will extract and print the BOM or Centroid (pick and place) file from the imported ODB++ file.

You can find information about it at: **broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top