Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to get started with CPLD/FPGA?

Status
Not open for further replies.

kieennx

Junior Member level 3
Joined
Jul 8, 2005
Messages
30
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,288
Activity points
1,626
Hi all,
This is not a new question but my experience about CPLD/FPGA is almost zero. All concepts and comments that you discuss here are very new for me. So can someone show me some ways to get closer? How can I start researching about CPLD/FPGA?
Thanks a lot.
 

Manjunatha_hv

Advanced Member level 3
Joined
Aug 3, 2005
Messages
810
Helped
240
Reputation
480
Reaction score
122
Trophy points
1,323
Location
INDIA
Activity points
8,689
Hello,


Go through good books on VHDL/Verilog programming first...then
study the FPGA Architecture details...




Here the couple of freely available tools to learn the same...
https://www.aldec.com/downloads/

Verilog Tutorial
Evita-Verilog is an interactive Verilog primer that provides a comprehensive overview of the Verilog language, complete reference guide, over 130 examples and a series of questions and answers at the end of each chapter.

VHDL Tutorial
Evita-VHDL is an interactive VHDL primer that provides a comprehensive overview of the VHDL language, complete reference guide, over 150 examples and a series of questions and answers at the end of each chapter.

and
https://www.xilinx.com/


---manju---
 

    kieennx

    Points: 2
    Helpful Answer Positive Rating

ylscqu

Member level 2
Joined
Dec 20, 2003
Messages
46
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
278
you had better make a pcb .then study and download example provided by Xilinx
 

deb_mallik

Banned
Joined
Jan 24, 2006
Messages
44
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,286
Activity points
0
start with examples in vhdl or verilog and simulate it and then go for cpld/fpga
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top