Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to fed this antenna in HFSS?

Status
Not open for further replies.
Port type in HFSS

i have seen such antenna.you need to fed it from the center point. even you can structure a SMA connector at the center of antenna & fed via.
 

Port type in HFSS

hellow, using CST mws to simulate this kind of antenna is much more convenience. you can use discrete port.
 

Re: Port type in HFSS

Easy, like the guy above said use an SMA feed. With HFSS its easy but will take an hour or two. If you use EMCoS, its gonna take not more than 10 minutes.
 

Re: Port type in HFSS

mhmm ... and how to feed this antenna in 'real life'

- connect the hot end to the center of the antenna!
- where to connect the cold side???

br,
andy
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top