Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to do the FPGA prototyping ?

Status
Not open for further replies.

ikru26

Banned
Joined
Feb 1, 2005
Messages
97
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Location
INDIA
Activity points
0
FPGA Prototyping

1.how to do prototyping ..\
2.assume i am having an Altera FPGA board and i am having RTL and test vectors..how will i inssert test veectors or test bench to verify my design which i will put into the FPGA.
3.how can i integrate with our normal simulators like NCSIM,MODELSIM..
 

gliss

Advanced Member level 2
Joined
Apr 22, 2005
Messages
692
Helped
75
Reputation
150
Reaction score
16
Trophy points
1,298
Activity points
5,892
FPGA Prototyping

It's easy. Instaniate the top level design in your testbench module and drive the inputs of the design with the testvector data.
 

Iouri

Advanced Member level 2
Joined
Aug 17, 2005
Messages
682
Helped
87
Reputation
174
Reaction score
8
Trophy points
1,298
Activity points
4,814
FPGA Prototyping

2. altera board nad test vectors, you don't need to insert test vectors in altera... Osciloscope will be better
 

gliss

Advanced Member level 2
Joined
Apr 22, 2005
Messages
692
Helped
75
Reputation
150
Reaction score
16
Trophy points
1,298
Activity points
5,892
FPGA Prototyping

First you should verify the functionality it ModelSim or NC. Then download to the board.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top