Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to design a milli metre wave detector?

Status
Not open for further replies.

mesohaib

Newbie level 4
Joined
Mar 21, 2009
Messages
7
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,320
how to design a milli meter wave detector?means how to do simulation of a coplanar wave guide connected with microstripline having a schottky diode in it for detecting power in it, excited by the power source and will have to match impedance of coplanar wave guide with microstrip line for avoiding power loss.all this project must have to design in hfss...kindly if some body help me in designing this project i will be thankful to him.mesohaib@hotmail.com
 

bouchy

Advanced Member level 4
Joined
Jul 11, 2004
Messages
113
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Location
USA
Activity points
794
Hello,
I worked on a similar project about 6 years ago, and I have to dig my notes back. At any rate, here are some of the ideas for you to start with.

1- You need the dimensions for your schottky diode for HFSS simulation
2- You need to model you RF transition from waveguide to coxial
I the time permit I will try to revisit some of my notes and get back to later on.
Good luck with your project.
Bouchy
 

haseb_09

Newbie level 4
Joined
Oct 4, 2009
Messages
6
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
pakistan
Activity points
1,323
bouchy said:
Hello,
I worked on a similar project about 6 years ago, and I have to dig my notes back. At any rate, here are some of the ideas for you to start with.

1- You need the dimensions for your schottky diode for HFSS simulation
2- You need to model you RF transition from waveguide to coxial
I the time permit I will try to revisit some of my notes and get back to later on.
Good luck with your project.
Bouchy

sir we r very much greatfull for ur such cooperation kindly fwd us some helpful material with a general figure so that we came to know that how could we join coplanar wave guide with microstrip line & how could we feed them by a power source waiting for ur positive response by haseb

Added after 12 minutes:

do some bdy hav help for hfss v11???
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top