skyworld_cy
Junior Member level 3
- Joined
- Jun 29, 2011
- Messages
- 31
- Helped
- 0
- Reputation
- 0
- Reaction score
- 1
- Trophy points
- 1,288
- Activity points
- 1,513
Hi,
I'm running post simulation with incisive tool, but always be headache to deal with those glitches for pads. The pad always has big delay while the signals period is smaller than it. I have tried to adjust pulse_r/e parameters to let signals go through pad and filter those small glitches, but this step is painful and frustrated me always. Some time glitches and signal go through at the same parameter while on the other case they are all removed from pad. And I also met similar problem when simulating with standard cells. Is there any advice for this problem? thanks.
skyworld
I'm running post simulation with incisive tool, but always be headache to deal with those glitches for pads. The pad always has big delay while the signals period is smaller than it. I have tried to adjust pulse_r/e parameters to let signals go through pad and filter those small glitches, but this step is painful and frustrated me always. Some time glitches and signal go through at the same parameter while on the other case they are all removed from pad. And I also met similar problem when simulating with standard cells. Is there any advice for this problem? thanks.
skyworld