Jun 7, 2011 #1 C chris_li Member level 2 Joined Nov 7, 2005 Messages 42 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,286 Activity points 1,569 I am going through a tutorial, and layout just completed, which includes a few IPs without any layout! When key in command under batch mode to check DRC, % calibre -drc -hier -64 -runset command_file -batch Calibre report error like "no layout of IP_name found"! Then, terminate! How can I only check partial gds excluding those IPs?
I am going through a tutorial, and layout just completed, which includes a few IPs without any layout! When key in command under batch mode to check DRC, % calibre -drc -hier -64 -runset command_file -batch Calibre report error like "no layout of IP_name found"! Then, terminate! How can I only check partial gds excluding those IPs?
Jun 7, 2011 #2 F frankaurora Junior Member level 1 Joined Jun 3, 2005 Messages 19 Helped 3 Reputation 6 Reaction score 1 Trophy points 1,283 Activity points 1,363 you should include "EXCLUDE CELL <cell name>" into the drc rules.
Jun 7, 2011 #3 S skal81 Full Member level 2 Joined Jan 19, 2005 Messages 121 Helped 38 Reputation 76 Reaction score 19 Trophy points 1,298 Activity points 1,478 You can also try the following settings: LAYOUT ERROR ON INPUT NO When YES (default) the execution stops when there is an error in the GDS (such as broken link). By setting it to NO the execution should continue.
You can also try the following settings: LAYOUT ERROR ON INPUT NO When YES (default) the execution stops when there is an error in the GDS (such as broken link). By setting it to NO the execution should continue.