Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to build your own car audio amplifier?

Status
Not open for further replies.

selvaraja

Full Member level 4
Joined
Jun 1, 2004
Messages
190
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Activity points
1,416
build your own car audio amplifier

Hi guys,

How to build your own car audio amplifier...have any idea you can share. thanks in advance.
 

Re: audio amplifier

I would suggest a ready made IC. **broken link removed**
is a selection.

If you want to 4x the power and reduce even harmonics, use a bridge topology.
 

audio amplifier

LM3886 68W amp seems very good. pcb can be found on the web as "Trivial Amplifier" **broken link removed**
 

audio amplifier

try this links:

hxxp://home.quicknet.nl/qn/prive/m.ursum/osio/70poweramp.jpg

hxxp://users.swing.be/edwinpaij/ampli_mosfet_360_w.htm

hxxp://www.diyaudio.com/forums/showthread.php?threadid=21113&perpage=15&highlight=&pagenumber=1

hxxp://www.diyaudio.com/forums/showthread.php?s=&threadid=28743

hope this helps you out :)
 

Re: audio amplifier

Check the ST site. They have Quad power amps which could be useful in saving space and cost.

bimbla.
 

audio amplifier

A very simple configuration with not much external components, can try TDA1518. It's not expensive either.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top