Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how make laout of n-mos

Status
Not open for further replies.

fixrouter4400

Full Member level 4
Joined
Feb 6, 2007
Messages
194
Helped
29
Reputation
58
Reaction score
6
Trophy points
1,298
Activity points
2,371
It depends on how you want to do it...and the process technology...but to give you a hint.

First make a new cell with cellname e.g. nmos2u2u which mean that the W & L is equal 2micron.
Short cut key CTRL + n.

You can make this dimension in poly plus the design rule then you can add the metal contact for Source and Drain then put the necessary text for clarity.

Cheers
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top