Jun 14, 2012 #1 Z zobid2 Newbie level 2 Joined Jun 14, 2012 Messages 2 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,304 Please help me that how i make a burner to burn ic through WinPIC. With drivers
Jun 14, 2012 #2 tpetar Advanced Member level 7 Joined Sep 27, 2010 Messages 6,417 Helped 1,713 Reputation 3,456 Reaction score 1,673 Trophy points 1,393 Location Pancevo-Belgrade, Serbia Activity points 37,363 Why you whant to burn your PIC ? I supose you whant to program it, its flash memory. Do you have any existing programmer ?
Why you whant to burn your PIC ? I supose you whant to program it, its flash memory. Do you have any existing programmer ?
Jun 15, 2012 #3 Tahmid Advanced Member level 6 Joined Jun 17, 2008 Messages 4,756 Helped 1,798 Reputation 3,588 Reaction score 1,656 Trophy points 1,413 Location Berkeley, California Activity points 30,586 You can find lots of programmers if you search on this forum and Google. A programmer that runs off the serial port or parallel port may be relatively simple to design. One based on USB would be more complicated. Here is one that I used in the past (with some modifications): https://www.oshonsoft.com/picprog.html Hope this helps. Tahmid.
You can find lots of programmers if you search on this forum and Google. A programmer that runs off the serial port or parallel port may be relatively simple to design. One based on USB would be more complicated. Here is one that I used in the past (with some modifications): https://www.oshonsoft.com/picprog.html Hope this helps. Tahmid.