Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

horz trace on tektronix 465b

Status
Not open for further replies.
W

wilmot

Newbie level 1
Newbie level 1
Joined
Dec 6, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
:| i was given a tek 465b scope.everything seems to work except; the trace will not go across the screen,stays on the left of the tube.with r/l pot full clockwise.not shure where to look,have never worked on a scope before.any suggestions?? thanks in advance fellows
wilmot
 

Check horizontal deflection circuit, if it is CRT type.

wilmot said:
:| i was given a tek 465b scope.everything seems to work except; the trace will not go across the screen,stays on the left of the tube.with r/l pot full clockwise.not shure where to look,have never worked on a scope before.any suggestions?? thanks in advance fellows
wilmot
Click to expand...
 
  • Like
Reactions: wilmot

    W

    wilmot

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top