Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

High Frequency High Power Transformer Design

Status
Not open for further replies.
J

joshicn

Newbie level 4
Joined
Sep 18, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,318
I have to design transformer for following specifications :

Freq = 27.12 Mhz
C = 13 pF ( Load is capacitive )
Xc = 4.52e02
Source Impedance = 50 ohm
Driving Power = 1.0 to 1.5 Kw

From 1st 4 specifications, I know I've to use 1:4 turn ratio. But i dont know which cable to use ( 25 ohm cable etc ).

Any Help is appreciated.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top