joshicn
Newbie level 4
I have to design transformer for following specifications :
Freq = 27.12 Mhz
C = 13 pF ( Load is capacitive )
Xc = 4.52e02
Source Impedance = 50 ohm
Driving Power = 1.0 to 1.5 Kw
From 1st 4 specifications, I know I've to use 1:4 turn ratio. But i dont know which cable to use ( 25 ohm cable etc ).
Any Help is appreciated.
Freq = 27.12 Mhz
C = 13 pF ( Load is capacitive )
Xc = 4.52e02
Source Impedance = 50 ohm
Driving Power = 1.0 to 1.5 Kw
From 1st 4 specifications, I know I've to use 1:4 turn ratio. But i dont know which cable to use ( 25 ohm cable etc ).
Any Help is appreciated.