Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Hi I need a circuit to construct 5kva 48 volt inverter using h bridge with 3524

Status
Not open for further replies.
Sorry to say , but if you are asking for schematics for this size of project , you are more than likely out of your depth here.
Designing a 5kvA inverter is going to require more knowledge than just having the schematics.
There is going to be a lot of power floating around , and when things go pear shaped , and they will :0)
you are going to have a lot of smoke!!
A dare say even experienced designers in this field don't just cobble something like this together.
Just my 2c , others may disagree.
 

Am currently working on 48v inverter using 3524 and irf 2110 to drive the mosfet please help me with a working circuit thanks
Hi
Now what is your problem ? you'd better to ask about your problem accurately and then expect help of the others . isn't it ?
Best Wishes
Goldsmith
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top