Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Hi everyone! Problem with "locations" and "functions" in SolidWorks Electrical.

Status
Not open for further replies.

ivankvkharkiv

Newbie level 1
Joined
May 29, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
14
Hi everyone! Problem with "locations" and "functions" in SolidWorks Electrical.

Hi everyone! First of all thanks to all who paid attention to my question!

There is a rule that in one project in two defferent junction boxes (or control cabinets) you can have two terminal strips which are absolutely the same. For example you have terminal strip named X1 with terminals 1,2,3..... in janction box #1 and you have strip named X1 with terminals 1,2,3..... in janction box #2 in one project. And it's normal for real projects! In Autocad Electrical representation of janction boxes is locations, and in autocad electr you can have the same terminal strips in different locations in one project and you can't have the same terminal strip in one location as it should be! But in solidwork electrical you can't have the same terminal strips located in different locations which is not normal for the real life projects. The question is how to change this functionality to work as it's one in autocad electrical. Is it possible? And how? Also I asked my question in solidwork's official forum and nobody have answered till now:-( Here is my question more detailed in solidwork's forum: https://forum.solidworks.com/message/493239#493239.

Thanks for all answers! any information would be greate!
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top