Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS lumped port design

Status
Not open for further replies.
T

Techi

Member level 3
Joined
Oct 27, 2010
Messages
63
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Activity points
1,643
Hi, I am designing an antenna and assigning the lumped port on FR4 substrate. The attached image shows the port. Please take a look and guide me if the port is correctly assigned. thanks
lumped port help.png
 

Hi,
I think that the port is correctly assigned, the direction of the port represents the polarization of the electric field. For your case, the E is horizontal. it's a U antenna?
 
houdali said:
Hi,
I think that the port is correctly assigned, the direction of the port represents the polarization of the electric field. For your case, the E is horizontal. it's a U antenna?
Click to expand...
hi, thanks for checking and guiding. Its half wave dipole antenna and port is assigned with matching network.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top