Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] HFSS Coax to Waveguide Fields

Status
Not open for further replies.
C

crodriguez33

Newbie level 2
Joined
Feb 18, 2015
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
15
Hello all,
I am simulating a coax to waveguide transition in HFSS. After running the optimetrics and using those values, I got some really good S11 and S21 plots. Almost 100% transmission. But when I visualize the fields, I could barely see them. Does anyone know why this is happening? Could it be the color scheme in HFSS? Any help would be greatly appreciated. Thank you. Coax_WG_Optimized_Field.PNGCoax_WG_Optimized_S11.PNGCoax_WG_Optimized_S21.PNG
 

Welcome crodriguez33,

The default settings for the field visualizations are pretty bad.

Double clicking on the color scale in the top left will bring up the settings panel, on the third tab ("Marker/Arrow") there is a box labeled "Map sizes". Uncheck this, and set the desired arrow size with the slider.

Good Luck
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top