Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS 3D polar plot does not show up

Status
Not open for further replies.
R

rizwan183

Member level 4
Member level 4
Joined
Feb 15, 2013
Messages
70
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Location
Pakistan
Visit site
Activity points
1,817
What could be the possible reason that the 3d Polar plot does not show up? my values for radiation sphere varies from 0 to 1800 nad for phi 0 to 360.
 

- Are there some error messages while simulating?
- Are you using variables? Then you could try to set all variables to "nominal"
- You can try to check if the solution is available by creating for example a data table with the gain.
 
Thanx for the suggestion. There was no error. and i used optmistation with the incrementing values of the variable. what do you mean by setting variable values to nominal value and how to do that?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top