Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help with time bin using matlab

Status
Not open for further replies.

First One

Newbie level 5
Joined
Feb 12, 2010
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
UK
Activity points
1,351
Hi all,
I am investigating optical wireless at the moment and tracing the received rays and one thing I have to do is sorting each recieved optical power at a certain time to the right time bin.
Here is what I wanna do:
build time bin start from 0 and increased by 0.3 ns to 51 ns
each power I receive is comes at specific time so based on that time I need to put the power in the right place.
for example if I received 3x10^-6 W at 0.2 ns the power need to be dropped at the interval [0 0.3] and so on.

So, could you please help me with any idea of doing it by matlab
thanks in advance
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top