Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP: Why the Standby Current of Cyclone EP1C20 is so high?

Status
Not open for further replies.
M

mountain

Member level 2
Joined
May 22, 2004
Messages
49
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
649
My boss give me a problem that why the Standby Current Icc0 of @ltera Cyclone EP1C20F400C6 is so high?

The <@ltera Cyclone PowerPlay Early Power Estimator Version 2.0> reported that the Typical Standby Current Icc0 of EP1C20F400C6 is up 12mA. My boss think it too high, but don't know why. Maybe it is because of the leak current.

Can you tell me why the Standby Current Icc0 is so high?
It is better to instruct me the reason (circuit lever).

Thank you for your help!

<@ltera Cyclone PowerPlay Early Power Estimator Version 2.0>
h**p://www.@ltera.co.jp/support/devices/estimator/cyc-estimator/cyc-power_estimator_download.html
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top