Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP WANTED ON PIC 16F877 PROGRAMMING IN C LANGUAGE

Status
Not open for further replies.
R

RICKYLO

Junior Member level 3
Joined
Jan 15, 2006
Messages
25
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,528
I am wondering if anyone out there with an experience can helpme with my
school project using two PIC 16F877 programmed in C language.
Basically, I am using one of the PIC as a Transmitter and the data from the
TX pin which is connected to a FM Tx module will be picked up by the other
PIC which is going to act as a receiver and the received signals will appear
at its port which will then be interfaced to some devices.

Please let me know if someone is willing to help.

Regards, Rickylo
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top