sanjay
Full Member level 1
Hi there all,
I would be really glad if saome one could help me out.
We are trying to do a project using the Xilinx ISE 5.2i software.
with the spartan device xcs10-4pc84
Problem 1
when we go to select the device architecture we'll be using the option doesnt give us the menu for Spartan. It only gives for Virtex,VirtexPro,Spartan-II and many others..
We want to work with spartan device xcs10-4pc84 but we can not find a way to do it for no option is given.
PROBLEM 2:
Then as an alternative we decided for ISE 4.1 which supports spartan device as well.. but then it only allows us to go through the EDIF flow.
and not VHDL flow.
We want to start the design using VHDL flow.
but the program just doesnt allow us to implement the VHDL flow no option is shown.
HELP :
It would be really appreciated if someone could help us in this manner
as soon as possible.
Mail me at following address :
200016571@ctech.ac.za
scindian@hotmail.com
Thanking you guys
sanjay
I would be really glad if saome one could help me out.
We are trying to do a project using the Xilinx ISE 5.2i software.
with the spartan device xcs10-4pc84
Problem 1
when we go to select the device architecture we'll be using the option doesnt give us the menu for Spartan. It only gives for Virtex,VirtexPro,Spartan-II and many others..
We want to work with spartan device xcs10-4pc84 but we can not find a way to do it for no option is given.
PROBLEM 2:
Then as an alternative we decided for ISE 4.1 which supports spartan device as well.. but then it only allows us to go through the EDIF flow.
and not VHDL flow.
We want to start the design using VHDL flow.
but the program just doesnt allow us to implement the VHDL flow no option is shown.
HELP :
It would be really appreciated if someone could help us in this manner
as soon as possible.
Mail me at following address :
200016571@ctech.ac.za
scindian@hotmail.com
Thanking you guys
sanjay