Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help needed about Astro routing

Status
Not open for further replies.

eexuke

Full Member level 4
Joined
Mar 25, 2004
Messages
196
Helped
10
Reputation
20
Reaction score
3
Trophy points
1,298
Activity points
1,934
aboutastro

Dear all,
Currently when I finished astro routing on my design (50k gate, without memory, only 30% utilization), the violation is unbelievable large:there are totally 200k violations about "Wrong-way wire on via" even if I set the cost of non-preferred direction routing to a very high value.
Has anybody met with similar situations before or how can I deal with so many violations?

Thanks in advance!!
 

astro routing violation

Hi eexuke,

Check out the directiion of your standard cells pins.In case if they are in the non-preferred direction. Try to turnoff the switch wrongWayNoVia to 0 or try to change the direction of the pins.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top