Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with designing a coupler operating at 2.4GHz

Status
Not open for further replies.
O

onteri

Junior Member level 1
Joined
Dec 5, 2005
Messages
15
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,283
Activity points
1,387
help designing a coupler

hello i have an assignment to design a coupler operating at 2.4Ghz. It should have 4 ports and everything should be designed for Zo=50 ohm. the design must be made on Ansoft designer. I haven't studied couplers and dont know how to use ansoft designer. Can somebody help me please!!!!
 

Re: help designing a coupler

check david Pozar book ,

and download the ansoft designer SV "student version"

khouly
 

Re: help designing a coupler

thanks for the help but i want to know that there is any tool in Ansoft that can help me design a rat-race coupler just like there is a filter tool in Ansoft...
 

help designing a coupler

There is no such tool in ansoft designer,even in the newest version.The ansoft designer is easy to use. Try to read the manual and learn to use it.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top