Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with configuring nRF2401 and sending data

Status
Not open for further replies.
J

jaewon_c

Newbie level 1
Joined
Jan 3, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
Configuring nRF2401..

Hi guys,

I'm having trouble using TMS320VC5502 to control nRF2401 EVKIT to send digital data.

To configure the nRF2401, I'm sending the configuration data in 20bits chunks (as the entire configuration word is 120 bits) six times via SPI before deasserting CS to low.

Then I try to send data by loading the nRF2401 with address and payload before deasserting CE to low, without anything being received.

Can anyone correct me if I'm doing anything wrongly? Specifically in terms of :

1. Configuring nRF2401
2. Sending data

Thanks in advance to generous helpers-

Jae Won
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top