Re: Headroom
Hi!
It typically refers to the output swings of the amplfiers. Suppose you are designing an amplifier and using a power supply: VDD=5V and VSS=0. This means that the 'theoratical' headroom you have is 5V. However this is almost impossible to achieve because transistors need to have a minimum voltage 'drop' across them to be in the 'proper' operating region. Hence the actual 'headroom' you get is lower than the power supply you use. The issue of headroom gets complicated in newer technologies for instance when you work with very low voltages (around 1V). The devices in these technologies have already poor characteristics (non-ideal effects and if you use techniques such as 'cascoding', then the headroom issue gets further complicated.
If you are novice to analog design, then you might not have understood many terms, never mind. For the sake of understanding, headroom can be defined as the maximum 'swing' you can acheive without landing into problems. Typically used term is hence the voltage headroom, which is the related to the maximum output voltage swing you can achieve without affecting the performance of the amplifier.