Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help me stucked with A/D conversion

Status
Not open for further replies.
K

KrAK3N

Newbie level 6
Joined
Mar 7, 2007
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,350
hello

i'm here again with a small issue... i'm working on a project with a MCF51QE128


i'm trying to do a small position controller

read data>a/d conversion>process> digital output> engine+ sensor>other a/d conversion

the second conversion starts when the sensor in the engine put an analog data in a port of the microcontroller... working as the feedback in the controller...

if you have ideas about this ....please i will appreciate your help.


thanks everybody.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top