Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me solve a question about coils resistance

Status
Not open for further replies.

keni4eva

Newbie level 5
Joined
Sep 30, 2007
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,345
A coil of 12Ω resistance is in parallel with a 20Ω resistance. This combination is connected in series with a third coil of 8Ω resistance. if the whole circuit is connected accross a battery having an emf of 30volts and internal resistance of 2Ω. Caculate a) the terminal voltage of the battery and b) the power in the 12Ω coil.
 

Re: PLS HELP

:| (...scratch my head here)

Very eaaaassssy!!!


for a) V(bat) = 30V it stays put! (ask Sir Kirchhoff if in doubt)

for b)

Calculate the whole current in the circuit

V(bat) = Vt = 30V

Rt = ((12Ω × 20Ω)/(12Ω + 20Ω)) + 8Ω
Rt = 15.5Ω

It = Vt/Rt = 30V/15.5Ω
It = 1.9354A

V(@8Ω) = It×R(@8Ω) = 1.9354A(8Ω)
V(@8Ω) = 15.4838V

V(@12Ω) = Vt - V(@8Ω) = 30V - 15.4838V
V(@12Ω) = 14.5161V

P = IV

but I = V/R

P = V²/R = (V@12Ω)²/(12Ω)
P = (14.5161V)²/12Ω
P = 17.5598W

Added after 4 minutes:

I suggest you to play with Ohm's Law and Kirchhoff's laws

You should know that by now, I am only helping you but please make youe study serious (but don't take too serious like people in ICUs, hey, studying is fun)
 

Re: PLS HELP

am not sure if your a is correct
because i know terminal voltage to be emf minus current mulitply by the internal resistor. emf-current*internal resistor.
 

Re: PLS HELP

That has been given in the question to be (connected accross a battery having an emf of 30volts and internal resistance of 2Ω.)
 

Re: PLS HELP

So just put 2Ω in series with every thing and you can find the answer.

Rtot = 15.5 + 2 = 17.5
Itot = 30/17.5 = 1.71A

P(12Ω) = =V*I= (I*R)*I= I(12Ω)²*12Ω

I(12Ω) = Itot(20/(12+20))= 1.71(20/32)= 1.07A
P(12Ω) = 1.07² * 12 = 13.77W

Hope this helps
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top