Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me select chip with 8k internal flash, 4 ADC channels, I2C bus and 2 UARTs

Status
Not open for further replies.

shashavali_m

Member level 4
Joined
Apr 18, 2005
Messages
70
Helped
1
Reputation
2
Reaction score
0
Trophy points
6
Activity points
0
I need to have with 8K internal flash, 4 adc channel, I2C bus , 2 Uart
What chip should I use?
 

Re: Selection of chip

have you ever used PIC 16f877A?
 

Selection of chip

Hi,
Better solution for this type of problem would be parametric search.

If you want to buy that chip from a specific manufacturer or type (PIC, AVR, 8051, ARM etc.) then go to their website and search using parametric search option.

If you think to buy from any of the well-known, popular companies but not fixed, then go to digikey (www.digikey.com) and then search by "microcontroller".

Best regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top