jltebar
Junior Member level 2
- Joined
- Jan 28, 2002
- Messages
- 20
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Spain - Russia
- Activity points
- 134
Hi everyone!!!
I'm trying to control equipment from different manufacturers with this protocol.
By now, for what I've seen at the scope, the code is Biphase-Mark, there's a flag used at the begining and at the end of every message (10msec periodic) but I have no idea about the codes used by Sensormatic.
My intentions are to keep investigating about the matter, but I'd appreciate any help.
I wait for your comments.
Best Regards
I'm trying to control equipment from different manufacturers with this protocol.
By now, for what I've seen at the scope, the code is Biphase-Mark, there's a flag used at the begining and at the end of every message (10msec periodic) but I have no idea about the codes used by Sensormatic.
My intentions are to keep investigating about the matter, but I'd appreciate any help.
I wait for your comments.
Best Regards