Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I dont know whether this Code will Work. I have Kept this as Reference and working for the same. I too started working with LPC2292. Check out with this code and say me whether u got the output.
You are new to what? New to Microcontrollers, new to ARM, new to CAN?
You asked about CAN, so I guess you are new to CAN. You might want to start with an online CAN training rather than with code implementing CAN transmissions.
For online CAN training you can go to: http://www.esacademy.com/myacademy/classdescription.php?classid=14 or have a look at the FAQ which is more targeted at CANopen a higher level protocol
here: http://www.canopen.us/faq/
Sample programs for CAN on the LPC2129 are also available in the "files section" of the LPC2000 Yahoo group. http://tech.groups.yahoo.com/group/lpc2000/ look for "LPC2_CAN_Examples"
Just fyi, the implementation of CAN on the LPC2129 and 2292 is identical but there is a minor difference between the LPC2129 and the LPC2129/01 or for that matter LPC2292/01.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.